Connect with us

Hi, what are you looking for?


How To Fix A Gemmy Inflatable Motor

Troubleshooting Guide: How to Fix a Faulty Gemmy Inflatable Motor

Troubleshooting Guide: How to Fix a Faulty Gemmy Inflatable Motor

If you’re experiencing issues with your Gemmy inflatable motor, don’t fret! We’ve got you covered with this troubleshooting guide to get it up and running again.

1. Check the Power Supply: Ensure that the motor is connected to a reliable power source. Make sure the power cord is securely plugged into an outlet or battery pack.

2. Inspect the Motor: Examine the motor for any visible signs of damage or loose connections. Check if all cables are properly connected to the motor.

3. Test the Fuse: If your Gemmy inflatable motor has a fuse, inspect it for any signs of damage. Replace it with a new one if necessary.

4. Clean the Air Intake: Over time, dust and debris can accumulate in the air intake of the motor, causing it to malfunction. Use a soft brush or compressed air to clean out any obstructions.

5. Lubricate Moving Parts: Apply a small amount of lubricant to the moving parts of the motor, such as the bearings and gears. This can help reduce friction and improve overall performance.

6. Reset the Motor: Some Gemmy inflatable motors have a reset button. Press and hold this button for a few seconds to reset the motor to its default settings.

7. Contact Customer Support: If none of the above steps resolve the issue, it’s recommended to reach out to Gemmy’s customer support for further assistance. They can provide specific troubleshooting tips or arrange for repairs if needed.

Remember, always prioritize your safety when working with electrical devices. If you’re unsure about any step or encounter any difficulties, consult a professional technician for assistance.

By following these troubleshooting steps, you should be able to fix a faulty Gemmy inflatable motor and enjoy your inflatable decorations once again!

My 2023 Halloween Airblown Inflatable Display (ft. Big Skelly) 馃懟馃巸

Why isn’t the fan on my inflatable working?

If the fan on your inflatable is not working, there could be a few possible reasons for this issue. Here are some troubleshooting steps you can take to try and fix it:

1. Check the power source: Ensure that the fan is securely plugged into a working power outlet or that the batteries (if applicable) are correctly inserted. Also, make sure there are no loose connections or frayed wires.

2. Inspect the fan blades: Inspect the fan blades for any obstructions such as debris or tangled material that may be preventing them from spinning freely. Gently remove any blockages if found.

3. Examine the motor: If the fan is still not working, it’s possible that the motor might be faulty. Check for any visible signs of damage or wear and tear. If the motor seems damaged, it might need to be replaced.

4. Test the fan with a different power source: Try plugging the fan into a different power outlet or using a different set of batteries (if applicable). This will help determine if the issue lies with the original power source.

5. Contact the manufacturer: If you have tried all the above steps and the fan still does not work, it’s recommended to contact the manufacturer or seek professional help. They can provide further guidance or assist in repairing or replacing the fan.

Remember, always prioritize your safety when dealing with electrical components. If you’re unsure or uncomfortable with any step, it’s best to consult a professional rather than attempting to fix it on your own.

How can a broken inflatable be fixed?

To fix a broken inflatable, you can follow these steps:

1. Identify the problem: First, inspect the inflatable and locate the area that needs repair. This could be a tear, a puncture, or a leak.

2. Clean and dry the area: Before applying any patches or adhesive, make sure that the damaged area is clean and dry. Use a mild detergent and water to clean the surface, and then allow it to dry completely.

3. Apply a patch: Depending on the size of the damage, you can use a patch specifically designed for inflatables or a piece of repair fabric. Cut the patch into a shape that covers the damaged area with some extra space around it. Apply adhesive to both the patch and the damaged area, and then press the patch firmly onto the surface. Make sure there are no air bubbles trapped underneath.

4. Secure the patch: To ensure a secure bond, use a weight or apply pressure on the repaired area for the recommended time specified by the adhesive manufacturer. This will allow the adhesive to cure properly.

5. Test for leaks: After the adhesive has cured, inflate the inflatable and check if there are any more leaks. If you notice air escaping from a different area, repeat the steps above for that particular spot.

6. Maintain and prevent future damage: To prevent future damage, avoid sharp objects and rough surfaces when using the inflatable. Regularly inspect and maintain the inflatable by checking for signs of wear and tear, and promptly address any issues to avoid further damage.

Remember, it’s essential to follow the specific instructions provided by the manufacturer of your inflatable, as they may have specific repair procedures or products recommended for use.

How can an inflatable fuse be changed?

To change an inflatable fuse, follow these steps:

1. Locate the fuse: Inflatable devices usually have a fuse compartment where the fuse is housed. Check the owner’s manual or the manufacturer’s website for the exact location.

2. Turn off the device: Before replacing the fuse, make sure the inflatable device is turned off and unplugged from the power source to avoid any electrical accidents.

3. Remove the old fuse: Open the fuse compartment carefully and remove the old fuse. You may need a small pair of pliers or a fuse extractor tool to gently pull it out.

4. Check the fuse rating: Examine the old fuse or refer to the owner’s manual to determine the correct fuse rating and type. It is important to use a replacement fuse with the same specifications to avoid damage to the device.

5. Install the new fuse: Take the new fuse and carefully insert it into the fuse compartment, making sure it fits snugly and is properly aligned. Push it in until it clicks into place.

6. Close the fuse compartment: Close the fuse compartment securely to ensure proper functioning. Ensure that there are no loose parts or debris inside.

7. Test the device: Plug in the inflatable device and switch it on to test if the new fuse has resolved the issue. If everything works fine, you have successfully changed the inflatable fuse.

Remember, if you are unsure or uncomfortable with changing the fuse yourself, it is always recommended to consult a professional or contact the manufacturer for assistance.

Do outdoor inflatables consume a large amount of electricity?

Outdoor inflatables do consume electricity, but the amount varies depending on the size and features of the inflatable. Typically, larger and more complex inflatables, such as those with moving parts or lights, will consume more electricity. However, the power consumption is generally not considered significant unless you have a large number of inflatables or leave them turned on for an extended period.

To reduce electricity consumption, consider the following tips:

1. Choose energy-efficient inflatables: Look for products that have energy-saving features or LED lights, which consume less electricity than traditional incandescent bulbs.
2. Limit the operating time: Only keep your inflatables running during the hours when they are most visible or needed, such as evenings or special occasions.
3. Use a timer: Set an automatic timer to turn off the inflatables during the night or when you’re not at home.
4. Consider solar-powered options: Some outdoor inflatables are equipped with solar panels, allowing them to operate without consuming traditional electricity.

By being mindful of your usage and selecting energy-efficient options, you can minimize the impact of outdoor inflatables on your electricity consumption.

Questions you’ve probably asked yourself

How to fix a Gemmy inflatable motor that is not turning on?

To fix a Gemmy inflatable motor that is not turning on, first check the power supply. Make sure it is securely connected and functioning properly. If the power supply is working, inspect the fuse in the motor unit. If the fuse is blown, replace it with a new one of the same type. If the fuse is intact, examine the switch on the motor for any damage or loose connections. Repair or replace the switch if necessary. If these steps do not resolve the issue, contact Gemmy customer support for further assistance.

How to troubleshoot a Gemmy inflatable motor that is running slowly?

The first step to troubleshoot a slowly running Gemmy inflatable motor is to check the power source. Ensure that the motor is receiving the correct voltage and that the power cord is securely connected. If the power supply is not the issue, inspect the motor for any obstructions or debris that may be hindering its performance. Additionally, check the fan blades for damage or misalignment. If necessary, clean or replace any damaged components. If these steps do not resolve the issue, it may be necessary to contact Gemmy customer support for further assistance.

How to repair a Gemmy inflatable motor that is making strange noises?

To repair a Gemmy inflatable motor that is making strange noises:
1. Inspect the motor: Check for any visible damage or loose parts.
2. Clean the motor: Remove any dirt or debris from the motor housing and fan blades.
3. Lubricate the motor: Apply lubricant to the motor shaft and bearings to reduce friction.
4. Check the power supply: Ensure the motor is receiving the correct voltage and check the power cord for any issues.
5. Replace faulty parts: If the motor continues to make strange noises, consider replacing any damaged or worn-out components.
6. Contact Gemmy: If all else fails, reach out to Gemmy customer support for further assistance.

In conclusion, fixing a Gemmy inflatable motor is a relatively simple process that can be completed by following a few easy steps. By inspecting for any potential issues, such as loose connections or clogged airflow, and addressing them accordingly, you can quickly get your Gemmy inflatable back in working order. Remember to disconnect the power supply before starting any repairs and to contact the manufacturer if you encounter any technical difficulties. With a little patience and troubleshooting, you’ll be able to enjoy your Gemmy inflatable for many more seasons to come.

James Fixman
Written By

James, a seasoned DIY enthusiast and problem solver, is the driving force behind HowToFix.ONE. With a knack for fixing everything from household appliances to automobiles, James shares his wealth of knowledge to help readers navigate the world of DIY fixes. His practical advice and step-by-step guides demystify the process of repair and maintenance, empowering everyone to become their own handyman.

Click to comment

Leave a Reply

Tu direcci贸n de correo electr贸nico no ser谩 publicada. Los campos obligatorios est谩n marcados con *

You May Also Like


馃摪 Table Of Contents1 Troubleshooting Guide for Resolving the 2008 Mercury Mariner Power Steering Assist Fault2 ELECTRIC POWER STEERING Problem Solved | Easy DIY...


馃摪 Table Of Contents1 How to Resolve M1 Brake Error 1505: A Comprehensive Guide2 Easy fix for T16000M stick/twist rudder – Complete tutorial3 Questions...


馃摪 Table Of Contents1 How to Fix a Fryd Disposable: Troubleshooting Tips and Tricks2 how to make vape at home eassy || Home made...


馃摪 Table Of Contents1 Troubleshooting Guide: Njoy Ace Not Hitting – How to Fix It2 VAPE EXPLODES 馃挦馃弨3 What is the cause of a...

Home Repair

馃摪 Table Of Contents1 How to Fix a Leaking Fuel Line Connector: Step-by-Step Guide2 Fuel Line Leak Quick Cheap Fix3 What can I use...


馃摪 Table Of Contents1 Troubleshooting Steps to Fix a Sunroof That’s Off Track2 Sunroof Maintenance | Goss’ Garage3 Why has my sunroof come off...


馃摪 Table Of Contents1 How to Resolve the C212A-16 Code Issue in Your Vehicle2 Dodge Journey ABS and Traction Control Issues Fixed!!3 What does...


馃摪 Table Of Contents1 How to Fix Play in Steering Rack: Simple Steps for a Smoother Ride2 How to Fix Wobbly Steering Wheel in...

Copyright 漏 2023 HOWTOFIX.ONE is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, we earn from qualifying purchases. Amazon and the Amazon logo are trademarks of, Inc